Updated November 2026

Knowing how to clean a roasting pan saves you from scrubbing for an hour after a big meal. The method depends on the pan material and how baked-on the drippings are. This guide covers a soak-first routine that works for most stainless steel and nonstick pans, plus fixes for the stubborn residue that builds up after a turkey or roast.

Start With a Soak, Not a Scrub

Scrubbing a hot, dry pan is the fastest way to scratch it and grind residue deeper into the surface. Let the pan cool until it is warm to the touch, then pour off the fat while it is still liquid. Save the drippings for gravy if you want them.

Shopping for one? See our guide: 6 Best All Clad Roasting Pans with Rack for Turkey and Roasts (2026).

Fill the pan with warm water and add a squirt of dish soap. Let it sit for at least 30 minutes. For heavy, burnt-on layers, soak for two hours or overnight.

Clean the Pan by Material

Stainless Steel

Stainless steel handles abrasion well, so a non-scratch sponge or a soft nylon pad is safe. For browned spots, make a paste of baking soda and water, spread it over the stain, and scrub gently in the direction of the grain. Rinse thoroughly and dry right away to prevent water spots.

Nonstick

Avoid steel wool and abrasive powders on nonstick coatings. Use a soft sponge and warm, soapy water. If food is stuck, a short soak is usually enough. Do not use cooking spray on the surface, because it can leave a sticky residue that is hard to remove.

Anodized or Enameled Finishes

Follow the manufacturer’s care instructions, since some finishes react poorly to harsh alkaline cleaners. Gentle, nonabrasive methods are the safest default.

Remove Stubborn Residue

When soaking is not enough, these methods help:

  1. Mix baking soda with water into a thick paste and let it sit on the stain for 15 to 20 minutes.
  2. Scrub with a soft sponge or nylon brush.
  3. For severe carbon, bring an inch of water to a simmer in the pan with a half cup of baking soda, then let it cool before scrubbing.
  4. Rinse, dry, and inspect. Repeat if needed.

Dishwasher use is convenient but can dull some finishes over time. Check the pan’s care guidance before running it through a cycle.

Cleaning Checklist

  • Dish soap and warm water
  • Non-scratch sponge or soft nylon brush
  • Baking soda
  • Soft towel for drying
  • Heat-safe bowl or container for drippings

Common Mistakes

  • Scrubbing a hot pan, which can warp it and set stains.
  • Using steel wool on nonstick surfaces.
  • Letting the pan air-dry, which leaves water spots on stainless steel.
  • Skipping the soak and relying on force alone.
  • Using bleach on stainless steel, which can cause pitting over time.

A non-scratch sponge is a safe all-purpose choice for both stainless and nonstick pans. View on Amazon

A soft nylon brush helps lift baked-on bits from corners and handles without damaging the surface. View on Amazon

A stainless steel cleaner formulated for cookware can help remove water spots and restore shine. View on Amazon

FAQ

Can I use oven cleaner on a roasting pan?

Oven cleaner is harsh and can damage stainless steel and nonstick coatings. Stick to soap, baking soda, and gentle scrubbing unless the manufacturer specifically approves a product.

How do I remove a burnt black layer from the bottom?

Simmer water with baking soda in the pan for several minutes, let it cool, then scrub with a nylon brush. Repeat if the residue persists.

Is it safe to put a roasting pan in the dishwasher?

Many pans tolerate it, but repeated cycles can dull finishes and discolor aluminum. Check the care instructions first.

Conclusion

Soaking, gentle scrubbing, and a baking soda paste handle most roasting pan messes without damaging the surface. Match your method to the pan material and avoid abrasives on nonstick. With a consistent routine, your pan will stay ready for the next big roast.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our holiday cooking & baking guides, checking product details against manufacturer specifications and owner feedback.