Updated November 2026
A shallow roasting pan for pork loin lets heat reach the meat from every side, so the outside browns and the center cooks evenly without steaming. Pick a pan with low sides, a rack, and enough room around the roast, and you can get a juicy loin with crisp edges and a flavorful pan base for gravy. This guide walks through choosing the pan, setting up the roast, and checking doneness.
What to Look for in a Shallow Roasting Pan
A shallow pan usually has sides about 2 to 3 inches tall. That height is enough to hold drippings but low enough that hot air circulates over the top of the loin. For a standard boneless loin of 3 to 4 pounds, look for a pan roughly 13 by 9 inches or a little larger so the meat sits in the center with at least an inch of clearance on each side.
Shopping for one? See our guide: 6 Best All Clad Roasting Pans with Rack for Turkey and Roasts (2026). For another angle, check out 15 Best Roasting Pans.
Material matters too. Heavy-gauge stainless steel and enameled steel hold heat evenly and resist warping at oven temperatures. Dark-finished pans brown faster, so you may need to check the loin 10 minutes early. A nonstick finish works, but it should be rated for oven use.
Setting Up the Pan Before You Roast
Use a flat rack inside the pan so the bottom of the loin does not sit in its own juices. Lightly oil the rack and the pan, season the meat, and place it fat side up. Pork loin has little fat, so a thin coat of oil plus a rub of salt, pepper, and herbs helps with browning.
- Pat the loin dry and rub it with 1 to 2 teaspoons of kosher salt per pound, or season it a few hours ahead.
- Set the rack in the pan and place the loin on it, centered.
- Add 1/2 cup of stock or water to the pan bottom to keep drippings from scorching.
- Insert a probe thermometer into the thickest part, avoiding the bone if present.
- Roast at 425°F for the first 15 minutes, then reduce to 325°F until the loin reaches 145°F internal.
- Rest the loin on a board for 10 minutes before slicing so the juices settle.
Checking Doneness and Making Pan Gravy
The USDA recommends cooking whole cuts of pork to an internal temperature of 145°F, followed by a rest of at least three minutes. Pull the loin when the thermometer reads about 140°F, since carryover heat will bring it up during the rest. Check the thickest and thinnest parts, because a loin often tapers at one end.
The drippings in the pan are the base for gravy. Set the pan over medium heat, scrape up the browned bits with a wooden spoon, and whisk in a tablespoon of flour per cup of liquid. Simmer for a few minutes until thickened.
Common Mistakes
- Crowding the pan with vegetables, which traps steam and prevents browning.
- Skipping the rack, which leaves the bottom of the loin soggy.
- Relying on time alone instead of a thermometer.
- Slicing right out of the oven, which lets juices run onto the board.
- Using a pan that is too large, so drippings burn in the corners.
Recommended Gear
- Roasting rack for pan: A flat rack keeps the loin off the pan floor so air reaches all sides. View on Amazon
- Instant-read or probe thermometer: Confirms doneness without guesswork. View on Amazon
- Heavy-gauge stainless steel roasting pan: Holds heat evenly and is easy to scrape for gravy. View on Amazon
Pork Loin Roasting Guide and Related Reading
If you are still deciding on size and style, Roasting Pan Pork Loin: How to Choose and Use One for Juicy Results covers the basics in more detail. For background on pan depth and dimensions, see What Is a Shallow Roasting Pan? Uses, Size and How to Choose One. Cooks roasting a larger cut may also find Roasting Pan for Ham: How to Choose, Use and Clean One (7 Steps) useful. If your rack keeps sticking after roasting, Why Is My Nonstick Roasting Pan with Rack Sticking? 5 Causes and Fixes explains the usual causes.
FAQ
Can I roast pork loin without a rack?
You can, but the bottom will sit in its juices and may steam instead of brown. A rack or a bed of sturdy vegetables keeps the meat elevated.
What internal temperature should pork loin reach?
The USDA recommends 145°F, measured in the thickest part, followed by a rest of at least three minutes. Pull it a few degrees early to account for carryover heat.
Is a shallow pan better than a deep one for pork loin?
A shallow pan usually browns the meat better because hot air reaches more of the surface. A deep pan can work for braising, but it tends to produce less browning.
Conclusion
A shallow roasting pan with a rack gives pork loin even heat, good browning, and a tasty base for gravy. Set up the pan with a little liquid, roast at a moderate temperature, and rely on a thermometer rather than the clock. Check your food safety guidance with your local extension office or a food safety professional if you have questions about specific handling practices.

